Saunaboard

the hottest board in the sauna sector



High temperatures and moisture, as well as the subsequent dryness that develops in a sauna stress the material enormously. With the newly developed Saunaboard we unite the highest technical standard, elegant design and advanced format in one board. At sauna temperatures this special plywood board emits neither formaldehyde (apart from the natural contents of the wood), nor biocides or isocyanates.

The Saunaboard from J. Grabner conforms to the strict ÖNORM M6219-1. Therefore all types of wood (except smoked, fitted with non-woven fabrics or treated wood types) are suitable for sauna construction and can be used (see test certificate Interior Analytics/Tappler).

Formats


2800 x 2050 mm
2050 x 2800 mm unpolished!
2500 x 1250 mm
max. 3150 x 2050 mm on request

 
Acacia Acacia
Acacia Acacia
Birch Birch
Oak Oak
Oak knotty Oak knotty
Oak chapped Oak chapped
spruce old wood spruce old wood
spruce knot-free spruce knot-free
Hemlock Hemlock
hemlock steamed hemlock steamed
hickory hickory
american nut american nut
wenge wenge
wenge wenge
stone pine stone pine
Acacia
Acacia
Birch
Oak
Oak knotty
Oak chapped
spruce old wood
spruce knot-free
Hemlock
hemlock steamed
hickory
american nut
wenge
wenge
stone pine
 

  • Quick Facts
    Pallet size: 24 units/36 units
    Purchase quantity: Can be produced from 1 unit up
    Thickness: 16 mm (other thicknesses on request) -> tested board thickness
  • Quality
    A/Blind
    Front side A = visible quality
    Back side blind = Blind veneer without quality standard
  • Joining Method
    Sliced veneer joined in solid character
  • Gluing
    D4 the latest generation acc. DIN EN 314 Part 2 Class 3. The gluing quality with regard to water resistance and temperature stability has been tested for sauna suitability under laboratory conditions over a significantly long period.
  • Scope of Application
    High-quality sauna-, infrared-, heat cabin- or wellness centre construction (interior design of the cabins). Can also be used for BIO- or steamer saunas with appropriate afterdrying and ventilation of the facility (max. short-term humidity 60 – 70%). Not suitable for wet rooms and steam chambers (100% humidity).
  • Inner Layer
    Plywood structure (peeled veneer) made from European aspen or alder (no exotic wood!). FSC® as well as PEFC™ certified veneers can be provided on request. The colour of the inner layer is matched to the top layer (aspen or alder).
  • Top Layer
    Sliced veneer top layers standard approx. 0.6mm (hardwood), 0.8mm (softwood). Other veneer thicknesses on request. The Saunaboard from J. Grabner sets new standards in design. Very many types of wood as well as embossed optics (Saunaboard Structure) are available in the standard range.
  • Processing
    For fixing the Saunaboards we recommend a combination of gluing and screwing the board elements (panels). Due to the great variety of sauna constructions, with a different method of fixing we advise the person performing the work to check this beforehand and to continue working accordingly. For softwoods, thick veneering as well as old woods we recommend brushing the boards before installation, in order to prevent these woods from splintering and flaking off later.

Advantages


  1. many design options (large and small panels)
  2. large selection of wood types and surface structures
  3. no emitting pollutants in the gluing according to test certificate ÖNORM 6219-1
  4. inner layer made from compact aspen or alder wood (sauna wood); as a result high screw retention for optimal fixing
  5. no exotic wood – conserving resources (carrier board)
  6. inner layer colour matched to top veneer layer (light wood → light inner layer = Aspen; dark wood → dark inner layer = Alder)
  7. FSC® or PEFC™ certified on request
  8. large formats (optimisation; less waste than small formats)
  9. pallet size: 36 units
  10. horizontal format 2050 x 2800 mm also possible!