Pallet size: 72 units
Purchase quantity: Can be produced from 1 unit up
Thickness: 4.0 mm with 0.6mm veneer top layer
with 0.8 or 1.5mm veneer top layer correspondingly higher (other thicknesses on request)
Front side A = visible quality
Back side blind = blind veneer without quality standard
Sliced veneer top layers joined in solid character
D4 the latest generation acc. DIN EN 314 Part 2 Class 3. The gluing quality with regard to water resistance and temperature stability has been tested for sauna suitability under laboratory conditions over a significantly long period.
Scope of Application
Radius parts (curves) as well as visible tongues (tongue- and groove panels) in high-quality sauna-, infrared-, heat cabin- or wellness centre construction (interior design of the cabins). Can also be used for BIO- or steamer saunas with appropriate afterdrying and ventilation of the facility (max. short-term humidity 60 – 70%). Not suitable for wet rooms and steam chambers (100% humidity).
Plywood structure (peeled veneer) made from European aspen or alder (no exotic wood!). FSC® as well as PEFC™ certified veneers can be provided on request. The colour of the inner layer is matched to the top layer (aspen or alder).
Sliced veneer top layers standard approx. 0.6mm (hardwood), 0.8mm (softwood). Other veneer thicknesses on request. The Saunaboard from J. Grabner sets new standards in design. Very many types of wood as well as embossed optics (Saunaboard Structure) are available in the standard range.
For fixing the Saunaboards we recommend a combination of gluing and screwing the board elements. Due to the great variety of sauna constructions, with a different method of fixing we advise the person performing the work to check this beforehand and to continue working accordingly. For softwoods, thick veneering as well as old woods we recommend brushing the boards before installation, in order to prevent these woods from splintering and flaking off later.